sheetcam.com

Les Newell wrote: ↑Mon Aug 02, 2021 12:34 pm The post can't set a DRO directly. You would need some way for the post to tell Mach what torch voltage to use. This is normally done with a custom M-code macro.

Do you have an example how to do this i doesn´t know how to do it right no

Yes but wouldnt it be easier to switch between tabs and i cant find how to copy multi drawing from the first job to te second job

No i doesn't have a cod for setting torch voltage in the g-code because i can't find out how to do it.
i have a a user dro in mach3 that i planing to use for but i have to do this no manualy en sometime i forget this,
so i know there's a option to get this done by sheetcam but i can find out how to

Is there a possibility to open more jobs. I have a couple of costumers that needs parts cut but the by example the first time he needs 20 of part and 10 of part 2 etc. etc. but the sixth time he needs different quantity and or different parts from earlier jobs. no I can nest them every time but if t...

Is there a possibility to open more jobs. I have a couple of costumers that needs parts cut but the by example the first time he needs 20 of part and 10 of part 2 etc. etc. but the sixth time he needs different quantity and or different parts from earlier jobs. no I can nest them every time but if t...

post processor.jpgI think I know what you are looking for. It depends on the post processor you use. Some of the basic ones won't have the settings for DTHC in the tool table. The one I use is the DTHC-HYT-DTHC_ SOftPierce. with this Post processor you get the added setting for torch height.Tool Ta...

finaly time for hobby things. what i do i mean with my question. i have made my own mach3 screen for use with my plasma table. I’m using a csmio controller card and this can transform 0-10volt to display ±130 volt in a dro for readout. by a little calculation in a marcopump. i'm using almost the sam...

Hello, i have a DIY plasma table Running with mach3 in combination with the csmio/ip-m the question i have is how to adjust the post processor so that i can set a user dro (for Torch voltage set point) now i have to do this manually every time. but is it possible to set this by sheetcam in the tool ...