sheetcam.com

Les,
Sent the manual thru email.
Thanks,
Derrick

Les,
Do you already have a post processor for the Komatsu Rasor tables? Or do you need the M and G codes to create one?

Thanks Les!!

Les,
The latest version keeps crashing as soon as you open a previous job and try to nest.
Support file attached.
Thanks

Josh, You might have to call Flashcut and have them upgrade your license to allow external g-code. I know I did with mine and it threw a bunch of errors before hand. Les, I'll try the parking feature, worst case, ill have you change the post. I still need to run some more jobs and see if everything ...

Les,
Just tried this out. Only thing I can see that is missing is the machine doesn't move to 0,0 after cutting the last piece.
Sheetcam didn't change the volts and amps in flashcut, however you can do this in the flashcut cam.
Thanks,
Derrick

Josh,
What would you like to know?

Les,
Anything on this?

M106 is the fabrication head command. which im assuming is amps and pressure.

G602/G603 are THC commands.

Or i could use the post processor to output a .DXF and let flashcut to the CAM work. I think that would be best. I tried the current DXF and it doesn't work.

Les, The post doesn't work with version 8. Below is a file flashcut 8 generated. G20 M106 Hplasma1 (Powermax125) #fabhead.mode = Cut G00 X0.160827 Y0.218793 G603 G03 X0.250250 Y0.271083 I0.029423 J0.052290 F74.00 G01 X0.250250 Y0.302083 G01 X0.250250 Y3.302078 G01 X0.250250 Y3.333078 G01 X0.281250 Y...

Is the Post Processor that is in sheet cam that is listed for Flashcut compatible with version 8? This is the newest version of the software, not sure how the thc on/off would work going from Candcnc to flashcut.
Thanks,
Derrick

Yes, It says TNG in the upper left corner, as well as in the about section. I am stumped as well...

Les,
That didn't work. Only show machine and work are still available.

I verified that it is Sheetcam TNG. Verison is 6.0.26
It did this all of a sudden, like I said, we also deleted and reinstalled with the same results.

Les,
It is the latest version up to date.