Search found 22 matches
- Sun Nov 27, 2022 12:56 pm
- Forum: Problems and questions
- Topic: Extra Unwanted/needed G1 move being output
- Replies: 4
- Views: 2467
Re: Extra Unwanted/needed G1 move being output
I had tried using G64 P0.010 Q0.010 but it still had a pause which seemed odd to me. Changing minArcSize = 0.001 in the post as Les mentioned seemed to fix the pause. Thanks! also if you are using uccnc or linuxcnc you can use the blended motion planner tolerance parameters G64 and you won't get any...
- Sun Nov 27, 2022 12:52 pm
- Forum: Problems and questions
- Topic: Extra Unwanted/needed G1 move being output
- Replies: 4
- Views: 2467
Re: Extra Unwanted/needed G1 move being output
That did the trick. Thanks!
Jeff
Jeff
Edit your post and add this line to function OnInit().
- Fri Nov 18, 2022 4:25 pm
- Forum: Problems and questions
- Topic: Extra Unwanted/needed G1 move being output
- Replies: 4
- Views: 2467
Extra Unwanted/needed G1 move being output
Hi, I've noticed that there is an extra G1 move being inserted in the Gcode. This causes a slight hesitation in movement and gives a slight divot with plasma. I'm not sure when this start but I've noticed it for awhile now. I tried some other post processors but they also seem to insert the G1. Is t...
- Sat Mar 21, 2020 1:05 am
- Forum: Problems and questions
- Topic: Tool Name not working correctly
- Replies: 2
- Views: 1221
Re: Tool Name not working correctly
Thanks. I will check out the new release.
- Thu Mar 19, 2020 7:34 pm
- Forum: Problems and questions
- Topic: Tool Name not working correctly
- Replies: 2
- Views: 1221
Tool Name not working correctly
Hi, I accidently updated to the latest Develop verion 6.1.72 I'm not sure what develope version I was on before. But anyways all my tool names changed and I can't seem to change back. i.e. Now Plasma, 0.07 inch kerf before Plasma, 1/4 Steel 65 Amp If I type in the correct name it will not apply it. ...
- Mon Dec 25, 2017 8:46 pm
- Forum: Problems and questions
- Topic: Post not working after updating
- Replies: 1
- Views: 545
- Mon Dec 25, 2017 8:16 pm
- Forum: Problems and questions
- Topic: Post not working after updating
- Replies: 1
- Views: 545
Post not working after updating
Hi Les,
I updated to the latest developmental version by accident. Anyways, it is not posting correctly now. (only outputs a few lines). It worked in ver.38 and still works on the release version.
I'm attaching a support file.
Is it possible for me to revert back to ver .38
Thanks
Jeff Tice
I updated to the latest developmental version by accident. Anyways, it is not posting correctly now. (only outputs a few lines). It worked in ver.38 and still works on the release version.
I'm attaching a support file.
Is it possible for me to revert back to ver .38
Thanks
Jeff Tice
- Sat Mar 25, 2017 4:52 pm
- Forum: Problems and questions
- Topic: Is there a PlasmaRotaryMach3 post with platemarker?
- Replies: 1
- Views: 855
Is there a PlasmaRotaryMach3 post with platemarker?
Hi Les, I'm using the PlasmaRotary Mach3 post. It works great. But the plate Marker doesn't seem to work correctly with a rotary axis. I'm wondering if there is an updated post for this? What isn't working correctly is the Offsets for the Plate Marker when using the rotary axis. I've tried modifying...
- Fri Mar 17, 2017 8:49 pm
- Forum: Problems and questions
- Topic: Plate Marker breaking x move into many small segments
- Replies: 0
- Views: 4425
Plate Marker breaking x move into many small segments
Hi, I am finally getting a platemarker hooked up... I've notice using the Plasma Rotary Post that on the attached drawing it is breaking the x moves into a bunch of small segments when Plate marker tool is used.. Plasma tool works as expected.... I've tried some other posts some break up the x some ...
- Thu Jan 19, 2017 5:21 pm
- Forum: Problems and questions
- Topic: Bug with Code Snippits
- Replies: 3
- Views: 1199
- Thu Jan 19, 2017 3:01 pm
- Forum: Problems and questions
- Topic: Bug with Code Snippits
- Replies: 3
- Views: 1199
Bug with Code Snippits
Hi Les, There appears to be a bug with code snippets.. Both in the released version and the developmental version. If you create a part file with a code snippet under cutting operations. Then later try to remove the code snippet by selecting "None" on the Cutting operations screen. It does...
- Mon Jan 16, 2017 7:41 pm
- Forum: New features
- Topic: Path Rules feedback
- Replies: 5
- Views: 5298
- Mon Jan 16, 2017 7:07 pm
- Forum: New features
- Topic: Path Rules feedback
- Replies: 5
- Views: 5298
Hi Les, I tried what you suggested using a Job template. But it still requires going into Cutting Operation and applying a Path Rule to the part that I load. Just thinking out loud here. It would almost be nice if path rules were handled similar to tools. I'm speaking from a user perspective and hav...
- Mon Jan 16, 2017 4:02 pm
- Forum: New features
- Topic: Path Rules feedback
- Replies: 5
- Views: 5298
Path Rules feedback
Hi Les, I started using the Path Rules a couple weeks ago and I find I do like them for certain things that I cut.. One problem I see though is that the path rules are not saved with the Part file. I tend to cut a lot of repeat parts and one thing I've always liked with Sheetcam is the ease with whi...
- Fri Jan 13, 2017 7:53 pm
- Forum: Problems and questions
- Topic: Small error with the PlasmaRotary Mach3 Post
- Replies: 6
- Views: 1927