sheetcam.com

ggeh

This might help. https://youtu.be/_aMwuEA55Gc Well thank you again for your time and help. I'm making a parking plate out of .25 aluminum for my router when I change from router to plasma so I don't have to disconnect the cooling lines and the electrics. Its going to mount on the bracket for y axis...

ggeh

How do I leave small tabs to hold the part from dropping out while machining. The tabs can be cut by hand after machining process to release the part from the stock. Not sure what this is called or even if this is done in sheetcam.
Thanks, Gary

ggeh

Try this one: CandCNC_LCNCRouter_REV2.scpost Steve It worked like a charm, Thank you very much. The file I was having issues with now works. Don't know why I didn't have that router post possessor but thanks to you I have it now and it works. Thanks to all you for your help on this now I can sleep ...

ggeh

WyoGreen wrote: ↑Mon Apr 06, 2020 5:21 pm Try this one:
CandCNC_LCNCRouter_REV2.scpost

WyoGreen wrote: ↑Mon Apr 06, 2020 4:09 pm CandCNC has a Command CNC router post, it should have come with your computer.

Steve

Steve thanks for the post, I have elderly parents I have to take care of at the moment but will try the post and let you all know what happens. Thanks Gary

ggeh

WyoGreen wrote: ↑Mon Apr 06, 2020 4:09 pm CandCNC has a Command CNC router post, it should have come with your computer.

Steve

Hi Steve
Im in sheetcam and all the post under command cnc are plasma.Is this what its called: Command CNC router post. Where else would this post be located?

ggeh

Using Linuxcnc pos possessor the G code is there in command cnc but nothing displayed in command cnc live view. error message: requested tool not in tool table. In sheetcam the tool is number 100 but commandcnc says requested tool not in tool table. This my first attempt at using my plasma table as ...

ggeh

Thank you I'll try Linuxcnc post

ggeh

I posted this also on plasmaspider. I have a 2014 starlab 4x4 table that I just installed a 2.2kw water cooled spindle. I made a 4x4 wood table to fit on top of my plasma table. I wanted to cut four slots in the table for t-track rail hold downs. In sheetcam I made 3 pass's at 35ipm to get a total d...

ggeh

Im trying to set up a spread sheet for sales. You have helped me before and I just want to say thanks again for taking the time to help us less knolageable guys like myself out.
Thanks again gary

ggeh

Is there a function in sheet cam that can tell me what the total cut distance is in inches? I looked in the simulation mode it gives the total seconds of the cuts but cant find the total distance of the cuts. I also clicked on the start icon and right clicked on the drawing and it tells the total of...

ggeh

I changed over from a windows computer to linux computer. the linux computer came with sheetcam on it. I need to transfer my sheetcam license from the windows computer to the linux computer. I dont know how to do that. help please.

Thanks Gary

ggeh

I made a drawing in bobcad and put some text on it and saved as .dxf file. When i bring the drawing into sheetcam the drawing is there but the text is not. This is my first time putting text on a project to be cut on my plasma table. I dont know what im doing wrong or not doing. Any suggestions? Tha...

sheetcam.com

Search found 12 matches

Re: part drop out

part drop out

Re: routing post prossesor?

Re: routing post prossesor?

Re: routing post prossesor?

Re: routing post prossesor?

Re: routing post prossesor?

routing post prossesor?

Re: total cut distance

total cut distance

move sheetcam license to new system computer

Text not on drawing