Search found 121 matches

by motoguy
Fri Mar 20, 2020 8:20 pm
Forum: New features
Topic: Manually disable a path rule at specific location.
Replies: 7
Views: 9213

Re: Manually disable a path rule at specific location.

Would setting a path rule which activates within a given corner angle (say, 60-70 degrees, or whatever), and setting the at start/at end code to the longer distance, not fix the issue? Set the criteria that start the rule at the top, and the criteria to adjust the "length of action" of the...
by motoguy
Fri Mar 20, 2020 8:15 pm
Forum: Problems and questions
Topic: Scanything setup and configuration questions
Replies: 34
Views: 11740

Re: Scanything setup and configuration questions

Thanks for the camera suggestions, Les. I too am using the Supereyes camera, and yes, it can be a booger to get a good image. I've found the following cameras on US Amazon. These seem to be the same cameras you suggest, for US based users. I find ScanAnything to be one of those "rarely used, bu...
by motoguy
Wed Jan 22, 2020 10:29 pm
Forum: Problems and questions
Topic: Job Report Est. Cut time Error
Replies: 10
Views: 1748

Re: Job Report Est. Cut time Error

I hate to come back to this since maybe not a lot of people use the reports, but we would like to use it a lot for estimating large jobs. I use the reports for pricing as well. The reports in the "stable" Windows version of SC were junk...way, way off. However, the reports in Linux seem t...
by motoguy
Thu Jan 16, 2020 9:10 pm
Forum: New features
Topic: Plasma drill
Replies: 40
Views: 44971

Re: Plasma drill

Downloaded Les' 8-17-19 post, to see how it works. Ran into a situation where I need the capability again. We'll see how it goes! Thanks!
by motoguy
Thu Jan 16, 2020 9:08 pm
Forum: Problems and questions
Topic: Any way to "lock out" the error display window?
Replies: 3
Views: 3446

Re: Any way to "lock out" the error display window?

Had a flub up today due to this, so...bump to the top! lol
by motoguy
Thu Jan 16, 2020 9:08 pm
Forum: Problems and questions
Topic: THC disable when crossing over existing kerf?
Replies: 8
Views: 7076

Re: THC disable when crossing over existing kerf?

Editing action points worked great for this purpose. Thanks!
by motoguy
Thu Jan 16, 2020 9:07 pm
Forum: New features
Topic: Ability to change Sheetcam generated lead-in options
Replies: 7
Views: 8192

Re: Ability to change Sheetcam generated lead-in options

That's good to know, Les! I'll play with that setting as well, and see if it makes for better placement!
by motoguy
Tue Dec 10, 2019 5:05 pm
Forum: Problems and questions
Topic: .part not saving path rule selections with part
Replies: 17
Views: 3746

Re: .part not saving path rule selections with part

Outstanding! Thank you Les! This is a huge timesaver for me!
by motoguy
Sun Dec 08, 2019 4:54 am
Forum: Problems and questions
Topic: .part not saving path rule selections with part
Replies: 17
Views: 3746

Re: .part not saving path rule selections with part

That is potentially problematic. Rules apply to the whole job so if you have different sets of rules saved with each part, things could get very messy when you reload them. You could end up with rules contradicting each other. Can't you define a standard set of rules, rather like you have a standar...
by motoguy
Fri Dec 06, 2019 5:21 pm
Forum: Problems and questions
Topic: .part not saving path rule selections with part
Replies: 17
Views: 3746

Re: .part not saving path rule selections with part

Any chance the new update will keep path rules tied to .part files as well? That's killing me right now with holiday orders. Instead of using the .part files, I'm having to save huge .job files full of parts, and just activate/deactivate them as I build a sheet (because the path files are saved with...
by motoguy
Fri Dec 06, 2019 5:18 pm
Forum: Problems and questions
Topic: Possible to have leadin/overcut distance tied to toolset?
Replies: 14
Views: 2731

Re: Possible to have leadin/overcut distance tied to toolset?

Enough people have asked for this so it's in the next dev release. Hopefully due out in the next day or so. Great news Les! Thanks for your constant support! Any chance the new update will keep path rules tied to .part files as well? That's killing me right now with holiday orders. Instead of using...
by motoguy
Mon Oct 28, 2019 4:13 pm
Forum: Problems and questions
Topic: Possible to have leadin/overcut distance tied to toolset?
Replies: 14
Views: 2731

Re: Possible to have leadin/overcut distance tied to toolset?

Yeah, that would be super handy. Even if the fields were left changeable (as they are now), but would populate in with the information from the toolset, by default.
by motoguy
Sat Oct 26, 2019 1:19 am
Forum: Problems and questions
Topic: Possible to have leadin/overcut distance tied to toolset?
Replies: 14
Views: 2731

Possible to have leadin/overcut distance tied to toolset?

Curious if it's possible to have the leadin/overcut distance tied to the tool selection? I find that the same settings are use (per material thickness, ie, tool selection) most (all) of the time. Having these variables tied to the tool, and not having to manually change them between tools (or forget...
by motoguy
Thu Oct 17, 2019 7:26 pm
Forum: Problems and questions
Topic: Is there a quick method for generating the tool table
Replies: 10
Views: 1811

Re: Is there a quick method for generating the tool table

This will be a very handy addition!