Search found 79 matches
- Wed Aug 10, 2022 3:52 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Good morning djreiswig, again I apologise for taking up so much of your time and patience. I have looked up the code in the post processor with the 'search' and have changed it to 'M01', now also saved. I am out on site at the moment and won't have to opportunity to try this till I return, however s...
- Tue Aug 09, 2022 9:52 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Good evening SeanP. Last time I used 45amps settings and tips and the problem was there, this time I am going to use 65amp settings as the speed will be higher and the problem 'should' be lesser. Don't actually know till I try. Wont to be prepared better this time round
- Tue Aug 09, 2022 3:32 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Good morning djerswig, if I change on this 'tap' post that line (M0 to M1), I understand that this will work on this 'tap' file only. So, if I want this to work on any other 'tap' file I would have to do the same. Is there any 'universal' way of incorporation this option in the say, post processor. ...
- Mon Aug 08, 2022 9:03 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Sorry gents even more, I am so confused that I don't know what I am doing now
- Mon Aug 08, 2022 8:48 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Sorry gentelmen, I have read the posts again and have missed the earlier information put forward. Les if I change the post processor to as you have stated will the now new button that djreswig has given me function as he has stated. As if that is the case then my problems are solved. Editing the G c...
- Mon Aug 08, 2022 4:30 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Thankyou for that djreswig for that. I have not made any changes to the post processor, so I will have a go and see what happens. I have the green button on the Mach3 screen, so with this change we should get what I want. Thankyou again
- Sun Aug 07, 2022 9:47 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Well lets see if I can upload a file.
- Fri Aug 05, 2022 6:27 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Didn't actually look if there is any M1 comands in the code. I am not actually doing a tool change as such. When the scriber finishes scribing, I then have to hit the 'run' button again for the machine to continue and do the cut. If I may me so dumb to ask, is that actually classed as a tool change,...
- Fri Aug 05, 2022 6:24 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Didn't actually look if there is any M1 comands in the code. I am not actually doing a tool change as such. When the scriber finishes scribing, I then have to hit the 'run' button again for the machine to continue and do the cut. If I may me so dumb to ask, is that actually classed as a tool change,...
- Fri Aug 05, 2022 2:17 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Good morning djreiswig. I have had a go yesterday to try this / new / your solution. Didn't work. Well I don't think so. I was assuming that if the 'box' is unchecked then the machine will not stop after a tool change (marking then cutting) and go to cut after it has finished marking. Now this is a ...
- Wed Jul 20, 2022 2:16 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Good evening djreiswig. Got the profile /macro thing installed / loaded / going and it goes. Well the 'button' at bottom left shows up on the Mach 3 screen. Haven't tried it yet, maybe later this week or next, don't want to cut up material for practice. I will report back when I try it and let you k...
- Sun Jul 10, 2022 10:38 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Good morning djreiswig, I had a look at the file that you sent me and so far it did show up with the green box bottom left pf the screen, however the other 'buttons' screen segments didn't. I am assuming that, there is required another screen / macro or something that must be added. I had my compute...
- Sat Jul 02, 2022 3:47 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Thankyou for that I will try in the next few day and report back
- Sat Jul 02, 2022 12:06 am
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Thankyou djreiswig. I got the software in about March 2013 and as you say the STOP button stops everything. I am very curious to see how this will work.
- Fri Jul 01, 2022 11:39 pm
- Forum: Problems and questions
- Topic: continuous operation
- Replies: 39
- Views: 16317
Re: continuous operation
Well good morning gentlemen, my version is 2013 and Mach3 has a stop button. Now I have tried to resize my screen shot photo of Mach3 but don't know how to as yet, however My Mach3 screen does have a 'stop' button. The 'stop' button is in the bottom right hand side of the screen, where the green run...