Search found 47 matches

by rikduk
Tue Dec 04, 2018 7:30 pm
Forum: Problems and questions
Topic: selected part pale
Replies: 3
Views: 633

Re: selected part pale

Thank you Les, it's a lot better! I've seen that question asked before, so I'll post my step by step for windows 7: Please forgive me, I'm translating from french: -In the control panel, go in Appearance and personalisation -go to: modify transparency colors of windows. -go to: advanced parameters -...
by rikduk
Tue Dec 04, 2018 3:37 pm
Forum: Problems and questions
Topic: selected part pale
Replies: 3
Views: 633

selected part pale

Hello, ( I use sheetcam for plasma cutting) When I select a part on the table display, the name of that part in the left hand parts list is highlighted light gray. My problem is the gray is too light, and i have a hard time seeing it. Is there a way to change the highlight color? I've tried looking ...
by rikduk
Mon Sep 24, 2018 2:12 pm
Forum: Problems and questions
Topic: start points in holes
Replies: 0
Views: 4804

start points in holes

Hello, i use sheetcam for plasma cutting, and when i load operations on a part with holes, they all start in the same direction. Is there a way for a part with multiple holes, that all starting points face the center point of the part? I use layers for holes and usually use templates for efficiency ...
by rikduk
Fri Sep 14, 2018 5:05 pm
Forum: Problems and questions
Topic: job file path
Replies: 2
Views: 948

Re: job file path

thank you!
by rikduk
Fri Sep 14, 2018 11:41 am
Forum: Problems and questions
Topic: job file path
Replies: 2
Views: 948

job file path

Hello, is it possible to add the job file path to the job report?

thank you

Richard
by rikduk
Mon Jan 19, 2015 12:34 am
Forum: Problems and questions
Topic: z axis reference slow down
Replies: 9
Views: 3978

Thanks guys for the help, and thanks Les, ill try that. I asked this, because on thick plate, i slow down to ref. speed too high, it just takes more time. On thin, if the plate is warped a little, sometimes the torch hits the plate while coming down to pierce height. That's why i thought to always s...
by rikduk
Fri Jan 16, 2015 12:54 pm
Forum: Problems and questions
Topic: z axis reference slow down
Replies: 9
Views: 3978

z axis reference slow down

When my torch goes down to sense the plate, it slows down when it gets to pierce height, if im not mistaken. How can i always have it slow down at 1/4" from the plate, regardless of the pierce height? I think its in the post-proc., but im not sure... using MP3000-DTHCII-DCC-Hyt-scriber8 Thank y...
by rikduk
Fri Sep 12, 2014 10:11 am
Forum: Yahoo posts
Topic: Is there a dictionary for M and S codes?
Replies: 5
Views: 4851

If im right, M22 is just a pause In my manual; S-codes 10-19 The first digit (1) turns the DTHC off. The second digit sets the percentage times 10. Example: S15 would turn the DTHC off (stop Z axis UP and DOWN commands) and set the Cut Current to 50% of the normal PRESET AMPS NOTE: The letter “I” in...
by rikduk
Fri Aug 01, 2014 9:10 am
Forum: Yahoo posts
Topic: Tap File Dimensions not right
Replies: 2
Views: 2182

Or, when you imported your dxf, it asks metric or inches, you have to select inches
by rikduk
Wed Jul 23, 2014 12:23 am
Forum: Problems and questions
Topic: near pierce
Replies: 0
Views: 1803

near pierce

Like this example job, if i want to slow down near the pierce, it slows the whole hole, even if its not included in the specified distance. A way around this would be to have a code snippet to slow down near the hole, and another snippet to get back to specified speed, but i dont know the m command ...
by rikduk
Tue Jul 15, 2014 2:55 pm
Forum: Problems and questions
Topic: dcc not correct volts
Replies: 0
Views: 2092

dcc not correct volts

Hello, im using dcc features with mp3000...post.
This job, torch volts are supposed to be 133 volts, but the code outputs 143.
if i change my tool to 132, it changes to 142.
changing tool doesnt make it go away, but changing the job does...
by rikduk
Fri May 23, 2014 9:28 am
Forum: Problems and questions
Topic: constant velocity not working when using outside offset
Replies: 4
Views: 2844

Wathever the shape you cut, cv (constant velocity) will work. it just keeps the speed constant, wich means Inside corners are rounded, because of the accel. decel. of your machine Are you talking about the feature cv stop on angle? If so, it works, even if you have a small radius. But i dont think i...
by rikduk
Sat May 17, 2014 4:25 pm
Forum: Problems and questions
Topic: multiple post buttons
Replies: 2
Views: 1377

thanks
by rikduk
Thu May 15, 2014 10:32 am
Forum: Problems and questions
Topic: multiple post buttons
Replies: 2
Views: 1377

multiple post buttons

I saw somewhere the possibility to have more than one post processor buttons, but cant find info on that, was it on an older version?

Thanks
by rikduk
Wed May 07, 2014 8:26 pm
Forum: Problems and questions
Topic: changing preset volts
Replies: 2
Views: 1388

:oops: lack of sleep is killing me...
i asked the same question a month ago...i got my answer.
Had to close and restart sheetcam...