Search found 14 matches
- Sun Jul 12, 2015 12:19 am
- Forum: Problems and questions
- Topic: SheetCam running slow in DynaTorch
- Replies: 8
- Views: 3661
- Fri Jul 10, 2015 1:45 am
- Forum: Problems and questions
- Topic: SheetCam running slow in DynaTorch
- Replies: 8
- Views: 3661
- Fri Jul 10, 2015 1:41 am
- Forum: Problems and questions
- Topic: SheetCam running slow in DynaTorch
- Replies: 8
- Views: 3661
Dyanatorch is great to work with. Don't be afraid to give them a call or send them an email anytime you have questions or problems. Sometimes you have to get them to speak a non professional language for us who don't live and breathe CNC plasma but they will definitely get you an answer. Good luck w...
- Wed Jul 08, 2015 9:54 pm
- Forum: Problems and questions
- Topic: SheetCam running slow in DynaTorch
- Replies: 8
- Views: 3661
I have a Dynatorch table and use Sheetcam. You should be controlling your speed with the Dynatorch software not Sheetcam (at least that is how mine works). Have you tried running it with the torch on? I haven't done a dry run in a while but maybe with the torch off it only runs a certain speed. I co...
- Tue Feb 11, 2014 2:03 pm
- Forum: Problems and questions
- Topic: Red outside - Yellow inside
- Replies: 8
- Views: 3189
- Tue Feb 11, 2014 12:33 pm
- Forum: Problems and questions
- Topic: Red outside - Yellow inside
- Replies: 8
- Views: 3189
- Mon Feb 10, 2014 8:37 pm
- Forum: Problems and questions
- Topic: Red outside - Yellow inside
- Replies: 8
- Views: 3189
Getting this error now Outside Offset, 0, T1: PowerMax 45 Error: Evaluation limit reached Post processing failed I assume that is because I dont have the paid STABLE version. What do you need from me so you know I have paid? I never did download the STABLE version until now. I have always run the DE...
- Mon Feb 10, 2014 7:53 pm
- Forum: Problems and questions
- Topic: Red outside - Yellow inside
- Replies: 8
- Views: 3189
I just downloaded the latest DEV version. I then tried the file again. Now the MICHAEL JOH are all in red and the N is the only letter in yellow. Update: I just downloaded the STABLE version and all letters are in yellow so it is working as it should. How do I know if I have the paid STABLE version?
- Sun Feb 09, 2014 4:42 pm
- Forum: Problems and questions
- Topic: Red outside - Yellow inside
- Replies: 8
- Views: 3189
Red outside - Yellow inside
I having a problem with block letters on a sign. I am plasma cutting. I have a red line for the outside of the sign and on the inside I have a name - MICHAEL JOHN - the letters are block letters and will fall out when plasma cut. The issue I am having is that the 'L and JOH are showing up in red lik...
- Thu Jul 04, 2013 12:30 pm
- Forum: Problems and questions
- Topic: Nesting More Than One Drawing
- Replies: 1
- Views: 1455
Nesting More Than One Drawing
I have searched the forum and tried everything to no avail. How do I nest more than one drawing? Every time I get my first drawing nested and then try to import the second drawing, the first one disappears. I know it is something simple but cant figure it out. Thank you.
- Tue May 28, 2013 11:56 pm
- Forum: Problems and questions
- Topic: Reverse Cut Side
- Replies: 5
- Views: 3017
- Tue May 28, 2013 1:34 pm
- Forum: Problems and questions
- Topic: Reverse Cut Side
- Replies: 5
- Views: 3017
The issue I am having is when using outside offset is that I have two tool paths that get close together and then widen out. It will actually stop cutting where the paths get too close together and then start back up where they come apart. If I change to no offset it solves the problem but reverses ...
- Tue May 28, 2013 1:35 am
- Forum: Problems and questions
- Topic: Reverse Cut Side
- Replies: 5
- Views: 3017
Reverse Cut Side
Why cant I get it to reverse cut side? I am sure I have done it before. I switch to No Offset and then click to show the starting points and right click on reverse cut side but it only changes that one starting point. I had 50 different starting points and had to change each one individually. I am s...
- Mon Mar 18, 2013 3:42 pm
- Forum: Yahoo posts
- Topic: Opening File
- Replies: 1
- Views: 8160
Opening File
I am new to SheetCam and am attempting to figure things out tho not very successfully. I have gotten a couple files to process and then cut correctly but am having troubles with others. Ok, first question, every time I open a DXF file in SC I am getting a pop up that says : "You have opened a f...