Statistics: Posted by djreiswig — Fri Mar 29, 2024 2:18 pm
Statistics: Posted by djreiswig — Fri Mar 29, 2024 11:05 am
Statistics: Posted by Jim Earl9 — Fri Mar 29, 2024 4:00 am
Statistics: Posted by djreiswig — Fri Mar 29, 2024 2:58 am
Statistics: Posted by Jim Earl9 — Fri Mar 29, 2024 2:54 am
Statistics: Posted by djreiswig — Fri Mar 29, 2024 2:52 am
Statistics: Posted by Jim Earl9 — Fri Mar 29, 2024 1:22 am
Code:
function OnPenDown() if(dist >= (refdistance/scale)) then
Code:
function OnPenDown() if(toolClass ~= "PlasmaTool") then return end if(dist >= (refdistance/scale)) then
Statistics: Posted by Les Newell — Thu Mar 28, 2024 2:49 pm
Statistics: Posted by metalman23 — Thu Mar 28, 2024 2:18 pm
Statistics: Posted by finyuk2005 — Thu Mar 28, 2024 1:32 am
Statistics: Posted by finyuk2005 — Wed Mar 27, 2024 10:39 pm
Statistics: Posted by finyuk2005 — Wed Mar 27, 2024 6:15 pm
Code:
N0160 G31 Z -100 F400.0 probe surfaceN0170 G92 Z0.0000 Zero Z axisN0180 G00 Z3.6000 Move to pierce heightN0190 M03 Torch onN0200 G04 P0.7 pierce delayN0210 G01 X-52.9423 Y119.7730 Z1.5000 F100.0 Move to cut height
Do you have torch height control? If so, try disabling it.Statistics: Posted by Les Newell — Wed Mar 27, 2024 6:11 pm