No Post Processor for THC301?

Having problems with or questions about SheetCam? Post them here.
Post Reply
Granite
Posts: 1
Joined: Sat Nov 18, 2017 2:32 pm

No Post Processor for THC301?

Post by Granite »

I run SheetCam with Mach3 and a THC301 made by Texas MicroCircuits. Use a machine torch with a scriber plate marker. Thermal Dynamics A60.

Attached is a text file of the Post Processor file I am using.

This Post Processor is "Designed for use with Mach3 and CandCNC MP1000-THC and Floating head Touch-n-Go\n"

Has anyone made a Post Processor file specifically for the THC301?

The reason I want to know is that after a lot of troubleshooting with "Arc OK" issues, I'm hoping find an optimum configuration for my machine. I can cut a part or two without much trouble. But when I have a nest of parts or a part with multiple pierces, my machine will stop upon making a new pierce. The torch remains on but the machine won't advance, no "Arc OK" signal.

Running SheetCam V 4.0.10 on my machine. (I've looked at version 6.0.23 and it still did not have a PP for THC301)

Should I continue down this path or is the Post Processor file a non-issue for my "Arc OK" issues?

Thanks for reading,
Dan
Attachments
DF Post Processor Backup Original.txt
(5.92 KiB) Downloaded 156 times
Post Reply