Problem with Gcode

Having problems with or questions about SheetCam? Post them here.
Post Reply
Frytunio88
Posts: 1
Joined: Mon Oct 09, 2017 9:47 pm

Problem with Gcode

Post by Frytunio88 »

Hey everyone i have problem with SheetCam tng was working perfect few hours and then stop making proper Gcode doesn't meter which dxf i will be import and which tool i will be use its always generate similar Code

N0010 (Filename: wheel.tap)
N0020 (Post processor: Mach3.scpost)
N0030 (Date:2017-10-11 Time:21:11:02)
N0040 G21 (Units: Metric)
N0050 G40 G90 G91.1
N0060 F1
N0070 (Part: wheel)
N0080 M05 M30
No idea why this happen i dint change any setup. Please help .
jim1108
Posts: 74
Joined: Sat Oct 29, 2016 1:19 pm
Location: New Mexico, USA

Post by jim1108 »

I don't know your level of expertise with SC, but make sure your operation boxes are checked. People generally upload the job file which helps in troubleshooting by others.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

It could be a license issue. Send me your license serial number off-list. You can get your serial number in Help->about.
Post Reply