wincnc not compatible with Path Rules?

Having problems with or questions about SheetCam? Post them here.
Post Reply
Marty
Posts: 8
Joined: Thu Sep 18, 2014 6:03 pm

wincnc not compatible with Path Rules?

Post by Marty »

when I try to create a path rule, there is no option to turn thc on or off......not sure where to make a code change, in Sheetcam or in Wincnc?
Attachments
2017-10-06_11-54-28.jpg
2017-10-06_11-54-28.jpg (447.74 KiB) Viewed 860 times
SeanP
Posts: 217
Joined: Wed Oct 23, 2013 9:50 am

Rules

Post by SeanP »

You need to add code snippets:

S10 (DTHC OFF)

and

S20 (DTHC-ON)
Attachments
Code snippet.png
Code snippet.png (45.67 KiB) Viewed 843 times
Marty
Posts: 8
Joined: Thu Sep 18, 2014 6:03 pm

Post by Marty »

Thanks for the tip....appreciate that :) :)
Post Reply