Radius to end of arc differs from radius to startline
Posted: Thu Sep 07, 2017 11:38 am
I am getting the following error when I try and run some DXF files "radius to the end of the arc differs from the radius to the start 2508. I did a search and most suggest ij mode incremental I did this but it than just moves to a different line with the same error. I am at a loss of how to fix this issue.
I have attach a copy of the G code I am running and the DXF file and the post processor I am running in sheetcam
thanks in advance for the help.
Mike
I have attach a copy of the G code I am running and the DXF file and the post processor I am running in sheetcam
thanks in advance for the help.
Mike