Sheetcam Crashes

Having problems with or questions about SheetCam? Post them here.
Post Reply
gsfantos
Posts: 19
Joined: Mon Nov 21, 2016 12:01 pm

Sheetcam Crashes

Post by gsfantos »

Hi there,
everytime I am trying to import the specfific drawing once I am trying to create a new jet cutting operation, sheetcam crashes and shuts down!
Anyone has any idea what am I doing wrong?
Thanks in advance
Attachments
HS-UT-18-1001.dxf
(353.39 KiB) Downloaded 95 times
WyoGreen
Posts: 257
Joined: Wed May 07, 2014 10:02 pm

Post by WyoGreen »

I opened your file with no problems, and set up an inside and outside jet cutting operation with no problems either. Maybe your Sheetcam program is corrupted and needs to be reloaded.
dennisshaw
Posts: 20
Joined: Fri May 13, 2016 1:01 pm
Location: South Yorkshire

Post by dennisshaw »

It is possible some one as stole your License, check with Les. are try it with another dxf that previously worked.
Attachments
HS-UT-18-1001.svg
(40.95 KiB) Downloaded 77 times
User avatar
Les Newell
Site Admin
Posts: 3660
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

This shouldn't be a license issue. It is more likely a graphics problem. Try the development version of SheetCam as it uses a slightly different method of drawing the graphics.
gsfantos
Posts: 19
Joined: Mon Nov 21, 2016 12:01 pm

Post by gsfantos »

Hi there,
I am already using the development version of Sheetcam (with a proper licence). The problem appears only with the specific dxf file. If I remove some parts from the file then it works fine.
Any other suggestions?
Thanks in advance for your time
Post Reply