Proma 150 post processor help needed.

Having problems with or questions about SheetCam? Post them here.
Post Reply
TRP
Posts: 2
Joined: Fri Dec 02, 2016 8:33 pm

Proma 150 post processor help needed.

Post by TRP »

I need some help selecting or editing a post processor to work well with my Proma compact 150 THC. I don't have a floating head machine. I don't need drill, scriber or backlash. Whenever I use a THC post processor it continually resets my z zero higher and higher. How can I use the THC without the z zero climbing out of range?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Just use the 'Mach3 plasma' post. The THC posts are only needed if you have a touch-off switch.
TRP
Posts: 2
Joined: Fri Dec 02, 2016 8:33 pm

Post by TRP »

Thanks!
Post Reply