sheetcam.com Forum Index sheetcam.com
SheetCam discussion board
 
 Forum SubscriptionsForum Subscriptions    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

TNG development V6.1.15 released

 
Post new topic   Reply to topic    sheetcam.com Forum Index -> Yahoo posts (yahoo @forum.sheetcam.com)
View previous topic :: View next topic  
Author Message
Les Newell les.newell@...
Guest





PostPosted: Wed May 06, 2015 4:17 pm    Post subject: TNG development V6.1.15 released Reply with quote

Hi all, I have just uploaded V6.1.15 to www.sheetcam.com. This release
has the following changes:

Fixed: Rotary plasma outputting inaccurate coordinates on rectangular
tube with a very small corner radius.
Fixed: Rotary plasma simulation not limiting feeds to the rapid feed rate
Fixed: Rotary plasma options always defaulting to 'flat sheet'
Changed: Rotary plasma now limits corner radius to a minimum of 0.1mm
Added: arcResolution setting to RotaryPlasma posts. This controls how
smooth arcs are when cutting pipe or around corners
Fixed: Importing splines with sharp corners sometimes results in
chamfered corners
Fixed: Debugger not showing the current line when debugging Lua scripts
or posts
Fixed: Material name not being saved with the job
Fixed: Path rules not always using the correct feed if two rules have
the same start or end point

Les


------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Back to top
SeanP



Joined: 23 Oct 2013
Posts: 65

PostPosted: Thu May 07, 2015 9:01 pm    Post subject: Corel File Reply with quote

Hi Les,
That's great getting the corner chamfering problem sorted.

Just tried a quick file from Corel R11 dxf and so far looks good, but other dxf formats from corel seem to freeze and lock up sheetcam on mine, TNG loads them fine though.

Thanks



R14corel dxf.dxf
 Description:

Download
 Filename:  R14corel dxf.dxf
 Filesize:  45.22 KB
 Downloaded:  153 Time(s)


R11 dxf.dxf
 Description:

Download
 Filename:  R11 dxf.dxf
 Filesize:  9.71 KB
 Downloaded:  153 Time(s)

Back to top
View user's profile Send private message
Vmax549



Joined: 09 Nov 2009
Posts: 641

PostPosted: Sat May 09, 2015 4:30 pm    Post subject: Reply with quote

HIYA Les, I do not see that the Material Name is working. It is not being saved. Also the debug still does not set the bookmark.

(Wink TP
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    sheetcam.com Forum Index -> Yahoo posts (yahoo @forum.sheetcam.com) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group