sheetcam.com Forum Index sheetcam.com
SheetCam discussion board
 
 Forum SubscriptionsForum Subscriptions    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

TNG development V6.1.14 released

 
Post new topic   Reply to topic    sheetcam.com Forum Index -> Yahoo posts (yahoo @forum.sheetcam.com)
View previous topic :: View next topic  
Author Message
Les Newell les.newell@...
Guest





PostPosted: Wed Apr 22, 2015 12:13 pm    Post subject: TNG development V6.1.14 released Reply with quote

Hi all,

I have just uploaded V6.1.14 to www.sheetcam.com

Sorry for the long delay for this release. I have been woring on another
project over the last few months. That is now finished so I can get back
to SheetCam.

Fixed: Crashing on exit on some computers
Fixed: Hint icons being shown much too small.
Fixed: Save job and save job as icon swapped
Fixed: Sometimes not detecting arcs that have a very large radius and
very small included angle
Fixed: Rotary plasma plungin sometimes rotating 360 degrees when it
shouldn't
Changed: Mode menus now show as radio buttons instead of check boxes
Added: Option to delete contours
Fixed: sometimes generating incorrect leadins
Fixed: Editor not always showing correctly when a Lua macro throws an error
Fixed: Some tools showing incorrect hint icons
Added: Material name (Options->job options->material)
Fixed: Arcs with a huge radius and small included angle are converted to
lines
Added: 'Run post' button in post editor
Fixed: Overlapping rules sometimes not output correctly

Les


------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Back to top
'Belli Button' belli@i...
Guest





PostPosted: Wed Apr 22, 2015 12:57 pm    Post subject: TNG development V6.1.14 released Reply with quote

Hi Les,

Weren't you working on a lathe CAM at some point?



-----Original Message-----
From: sheetcam@yahoogroups.com [mailto:sheetcam@yahoogroups.com]
Sent: 22 April 2015 14:13
To: sheetcam@yahoogroups.com
Subject: [sheetcam] TNG development V6.1.14 released

Hi all,

I have just uploaded V6.1.14 to www.sheetcam.com

Sorry for the long delay for this release. I have been woring on another project over the last few months. That is now finished so I can get back to SheetCam.

Fixed: Crashing on exit on some computers
Fixed: Hint icons being shown much too small.
Fixed: Save job and save job as icon swapped
Fixed: Sometimes not detecting arcs that have a very large radius and very small included angle
Fixed: Rotary plasma plungin sometimes rotating 360 degrees when it shouldn't
Changed: Mode menus now show as radio buttons instead of check boxes
Added: Option to delete contours
Fixed: sometimes generating incorrect leadins
Fixed: Editor not always showing correctly when a Lua macro throws an error
Fixed: Some tools showing incorrect hint icons
Added: Material name (Options->job options->material)
Fixed: Arcs with a huge radius and small included angle are converted to lines
Added: 'Run post' button in post editor
Fixed: Overlapping rules sometimes not output correctly

Les


------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links






------------------------------------
Posted by: "Belli Button" <belli@iafrica.com>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Back to top
'Andy Wander' andywand...
Guest





PostPosted: Wed Apr 22, 2015 1:01 pm    Post subject: TNG development V6.1.14 released Reply with quote

Yes, please!

Andy Wander


From: sheetcam@yahoogroups.com [mailto:sheetcam@yahoogroups.com]
Sent: Wednesday, April 22, 2015 8:57 AM
To: sheetcam@yahoogroups.com
Subject: RE: [sheetcam] TNG development V6.1.14 released



Hi Les,

Weren't you working on a lathe CAM at some point?

-----Original Message-----
From: sheetcam@yahoogroups.com [mailto:sheetcam@yahoogroups.com]
Sent: 22 April 2015 14:13
To: sheetcam@yahoogroups.com
Subject: [sheetcam] TNG development V6.1.14 released

Hi all,

I have just uploaded V6.1.14 to www.sheetcam.com

Sorry for the long delay for this release. I have been woring on another project over the last few months. That is now finished so I can get back to SheetCam.

Fixed: Crashing on exit on some computers
Fixed: Hint icons being shown much too small.
Fixed: Save job and save job as icon swapped
Fixed: Sometimes not detecting arcs that have a very large radius and very small included angle
Fixed: Rotary plasma plungin sometimes rotating 360 degrees when it shouldn't
Changed: Mode menus now show as radio buttons instead of check boxes
Added: Option to delete contours
Fixed: sometimes generating incorrect leadins
Fixed: Editor not always showing correctly when a Lua macro throws an error
Fixed: Some tools showing incorrect hint icons
Added: Material name (Options->job options->material)
Fixed: Arcs with a huge radius and small included angle are converted to lines
Added: 'Run post' button in post editor
Fixed: Overlapping rules sometimes not output correctly

Les

------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------

------------------------------------

Yahoo Groups Links


__._,_.___
Posted by: "Andy Wander" <andywander@yahoo.com>
[img]http://geo.yahoo.com/serv?s=97476590/grpId=12675264/grpspId=1705007389/msgId=16731/stime=1429707694[/img]

Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) &bull; Terms of Use



__,_._,___
Back to top
art



Joined: 12 May 2006
Posts: 44
Location: LaGrange, GA USA

PostPosted: Wed Apr 22, 2015 1:11 pm    Post subject: TNG development V6.1.14 released Reply with quote

I'll third that one!
Art
Country Bubba


At 09:01 AM 4/22/2015, you wrote:


Quote:
Yes, please!

Andy Wander

From: sheetcam@yahoogroups.com [ mailto:sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)]
Sent: Wednesday, April 22, 2015 8:57 AM
To: sheetcam@yahoogroups.com
Subject: RE: [sheetcam] TNG development V6.1.14 released



Hi Les,

Weren't you working on a lathe CAM at some point?

-----Original Message-----
From: sheetcam@yahoogroups.com [ mailto:sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)]
Sent: 22 April 2015 14:13
To: sheetcam@yahoogroups.com
Subject: [sheetcam] TNG development V6.1.14 released

Hi all,

I have just uploaded V6.1.14 to www.sheetcam.com

Sorry for the long delay for this release. I have been woring on another project over the last few months. That is now finished so I can get back to SheetCam.

Fixed: Crashing on exit on some computers
Fixed: Hint icons being shown much too small.
Fixed: Save job and save job as icon swapped
Fixed: Sometimes not detecting arcs that have a very large radius and very small included angle
Fixed: Rotary plasma plungin sometimes rotating 360 degrees when it shouldn't
Changed: Mode menus now show as radio buttons instead of check boxes
Added: Option to delete contours
Fixed: sometimes generating incorrect leadins
Fixed: Editor not always showing correctly when a Lua macro throws an error
Fixed: Some tools showing incorrect hint icons
Added: Material name (Options->job options->material)
Fixed: Arcs with a huge radius and small included angle are converted to lines
Added: 'Run post' button in post editor
Fixed: Overlapping rules sometimes not output correctly

Les

------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------

------------------------------------


__._,_.___
Posted by: Art Eckstein <art.eckstein@gmail.com>
[img]http://geo.yahoo.com/serv?s=97476590/grpId=12675264/grpspId=1705007389/msgId=16732/stime=1429708310[/img]

Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) &bull; Terms of Use



__,_._,___
Back to top
View user's profile Send private message Visit poster's website
Les Newell les.newell@...
Guest





PostPosted: Wed Apr 22, 2015 5:33 pm    Post subject: TNG development V6.1.14 released Reply with quote

I have been making internal changes to simplify the addition of lathe
cam but I haven't really started working on it. Lathe is a longer term
project.

Les

On 22/04/2015 13:57, 'Belli Button' belli@iafrica.com [sheetcam] wrote:
Quote:
Hi Les,

Weren't you working on a lathe CAM at some point?





------------------------------------
Posted by: Les Newell <les.newell@fastmail.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/sheetcam/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/sheetcam/join
(Yahoo! ID required)

<*> To change settings via email:
sheetcam-digest@yahoogroups.com
sheetcam-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
sheetcam-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
Back to top
Display posts from previous:   
Post new topic   Reply to topic    sheetcam.com Forum Index -> Yahoo posts (yahoo @forum.sheetcam.com) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group