Re: PLATE MARKING Question
Posted: Fri May 02, 2014 4:27 pm
i posted my recently completed $100 plate marker setup on pirate4x4 site if anyone would like to copy ithttp://www.pirate4x4.com/forum/shop-tools/1704098-100-scribe-setup-plasma-table.html
also posted a video on youtube for your viewing pleasure
https://www.youtube.com/watch?v=5O8rjZ_3c_4
i'm using the mach3 with scriber post. you need to edit gcode to add a m09 to turn the scribe off at the end of the scribe or it will drag the scribe around when cutting with plasma. i used a $19 electric scribe from home depot and bought most everything else on ebay.
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___
also posted a video on youtube for your viewing pleasure
https://www.youtube.com/watch?v=5O8rjZ_3c_4
i'm using the mach3 with scriber post. you need to edit gcode to add a m09 to turn the scribe off at the end of the scribe or it will drag the scribe around when cutting with plasma. i used a $19 electric scribe from home depot and bought most everything else on ebay.
__._,_.___
Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) • Terms of Use
__,_._,___