![Cool 8)](./images/smilies/icon_cool.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
We've been crazy busy over here and I haven't really had time to bother you... oh, I mean attempt to improve my workflow efficiency lol.
So the issue of the profiles not opening correctly is still going on over here. It happens with any profile and any job file, so whatever support info you need, let me know and I'll send it to you. I'm not sure what would be helpful.
I brought up in another post a while ago about copying an operation(s) to all parts. viewtopic.php?t=8959 I think this would be very useful as I usually load multiple (10+) parts in a given job and have to create the same operation for all parts. We have the option to copy an operation(s) and paste to another part. I'm sure you have a reason, but I do not see why this could not be done to paste to all parts or paste to selected parts. Sure would be a timesaver. It sounded like in the other post there may be some people who might agree.
Finally, I am at the point of begging you to consider seeing if there is some way to allow a different specification for leadin, leadout, and overcut on inside contours vs outside contours. At least on jet operations. Perpendicular with an overcut works best for us on inside contours and tangent with no overcut usually is best on outside contours. I have tried several times putting things on different layers and assigning a different operation, but this tends to take longer than just manually changing the start point properties. If it is just not reasonably doable, I do understand, but gosh it sure would be a time saver!