Number Offset

Having problems with or questions about SheetCam? Post them here.
Post Reply
Sumo
Posts: 1
Joined: Thu Jul 13, 2023 9:09 am

Number Offset

Post by Sumo »

How to enter the offset number in the Gcode
Top
User avatar
Les Newell
Site Admin
Posts: 3668
Joined: Thu May 11, 2006 8:12 pm

Re: Number Offset

Post by Les Newell »

SheetCam generates offset tool paths so it does not use tool offsets.
Top
Post Reply

Return to “Problems and questions”