Problem with Post processor

Having problems with or questions about SheetCam? Post them here.
Post Reply
samnang39
Posts: 4
Joined: Sun Aug 07, 2016 3:41 pm

Problem with Post processor

Post by samnang39 »

Dear all

It is first time for me that i use sheetcam software. My problem is that i try to post G code but the result show only

N0010 (Filename: Gear.tap)
N0020 (Post processor: Mach3 plasma.scpost)
N0030 (Date: 08/12/2017)
N0040 G21 (Units: Metric)
N0050 G53 G90 G91.1 G40
N0060 F1
N0070 S500
N0080 (Part: Gear)
N0090 M05 M30

please have me how to fix it?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Do you have a license? If so, what is the license serial number? You can find it in Help->about.
Uys Fick
Posts: 1
Joined: Mon Dec 18, 2017 9:08 am

Post by Uys Fick »

Hi Mr Newell,

I have exactly the same problem now, after installing Sheetcam on a new Windows 10 mini PC. This is the version 6.0.24. My license is FQI5LABI.

My other W10 mini PC runs perfectly on version 6.0.23.

This is the first time ever that I am experiencing any problems with Sheetcam, thanks for fantastic and affordable software.

Your assistance will be much appreciated.
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

If you send me a PM with your license serial I'll check it for you.
Post Reply