Licence Issue?

Having problems with or questions about SheetCam? Post them here.
Post Reply
SMFCad
Posts: 5
Joined: Tue Oct 24, 2017 9:14 am

Licence Issue?

Post by SMFCad »

I currently have an problem with my sheetcam software and wondering if anyone can help?

After post processing a document and creating a .tap file, I try to open the .tap file into the plasma software and nothing is appearing, no picture of the job or no code either.

This has never occurred for around a year and has just suddenly started to happen, I've read a few post on the forums and seen it is possibly a licence issue? Can anyone help out?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

If you send me your license ID in a PM I'll check it for you. You can find the ID in Help->about.
SMFCad
Posts: 5
Joined: Tue Oct 24, 2017 9:14 am

Post by SMFCad »

Okay thanks, I've PM'ed you the licence ID
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

I'm afraid that license has been pirated and will no longer work.
For anyone else if you are having a similar problem and your license isn't in your name or a name you recognize it is quite likely pirated. Unfortunately there are a number of sellers who have been selling copied licenses.
SMFCad
Posts: 5
Joined: Tue Oct 24, 2017 9:14 am

Post by SMFCad »

So do we need to re-purchase a license from sheetcam and this will fix the the above error?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Yes, I am afraid you need a new license. As this isn't your fault I'll send you a discount code off-list.
SMFCad
Posts: 5
Joined: Tue Oct 24, 2017 9:14 am

Post by SMFCad »

Thanks for that and thanks for your assistance
SMFCad
Posts: 5
Joined: Tue Oct 24, 2017 9:14 am

Post by SMFCad »

For reference, ESCCO sold us this license
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Contact them before purchasing a license. They should replace it free of charge.
Post Reply