error: failed to update user configuration file

Having problems with or questions about SheetCam? Post them here.
Post Reply
WyoGreen
Posts: 257
Joined: Wed May 07, 2014 10:02 pm

error: failed to update user configuration file

Post by WyoGreen »

Sheetcam version 6.1.42 for Linux.

Whenever I exit Sheetcam, I get the above error. This has been going on for some time now, and is a bit annoying. I thought I had asked about this before, but have been unable to find the post, so maybe I only thought I did.

Anyway, I'll attach a screen shot of the error, perhaps someone can help figure it out.

Steve
Attachments
error.png
error.png (24.06 KiB) Viewed 1069 times
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

6.1.42 was supposed to fix that error. Oh well, back to the drawing board...
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

Ok, the latest 6.1.43 seems to fix it.
motoguy
Posts: 121
Joined: Sun May 01, 2016 12:02 am

Post by motoguy »

I was getting it non-stop. Updated to .43, and I don't believe I've had the error since.
Post Reply