Having problems with or questions about SheetCam? Post them here.
-
Marty
- Posts: 8
- Joined: Thu Sep 18, 2014 6:03 pm
Post
by Marty »
when I try to create a path rule, there is no option to turn thc on or off......not sure where to make a code change, in Sheetcam or in Wincnc?
-
Attachments
-
- 2017-10-06_11-54-28.jpg (447.74 KiB) Viewed 918 times
-
SeanP
- Posts: 217
- Joined: Wed Oct 23, 2013 9:50 am
Post
by SeanP »
You need to add code snippets:
S10 (DTHC OFF)
and
S20 (DTHC-ON)
-
Attachments
-
- Code snippet.png (45.67 KiB) Viewed 901 times
-
Marty
- Posts: 8
- Joined: Thu Sep 18, 2014 6:03 pm
Post
by Marty »
Thanks for the tip....appreciate that