Torchmate .gm ?

Having problems with or questions about SheetCam? Post them here.
Post Reply
noclinkers
Posts: 5
Joined: Wed Apr 23, 2014 7:23 pm

Torchmate .gm ?

Post by noclinkers »

I would like to use Sheetcam with my Torchmate Accumove 3 controller. It uses a .gm file.
Any help? Thanks
mechanicalman
Posts: 17
Joined: Sun Aug 28, 2016 4:18 am

Post by mechanicalman »

See if anything in this thread helps:

http://forum.sheetcam.com/viewtopic.php ... =torchmate
Post Reply