I have the PlanetCNC USB-mk3 controler and witch post procesor is compatible with this controler without manualy modifying the G code.
Is there someone who uses the PlanetCNC USB controler.
Post procesor problem
- Les Newell
- Site Admin
- Posts: 3677
- Joined: Thu May 11, 2006 8:12 pm
- Les Newell
- Site Admin
- Posts: 3677
- Joined: Thu May 11, 2006 8:12 pm
In SheetCam go to Options->machine->post processor and click on the 'Edit post' button. Look for this piece of code:
and change it to
That should do what you want.
Code: Select all
function Reference()
firstRef = false
post.Text(seekCode .. "\n")
post.ModalText(" G92 Z")
post.Number(-switchOffset * scale, "0.0###")
post.Eol()
post.CancelModalNumbers()
end
Code: Select all
function Reference()
firstRef = false
post.Text(seekCode .. "\n")
post.Eol()
post.CancelModalNumbers()
end