Lost Power in building now sheetcam wont open.

Having problems with or questions about SheetCam? Post them here.
Post Reply
Nfamuskeith
Posts: 1
Joined: Tue Jul 03, 2012 10:37 pm

Lost Power in building now sheetcam wont open.

Post by Nfamuskeith »

Today I had my plasma table on and the power went out to the shop. When the power came on we rebooted the system and when I went to fire up sheetcam I'm getting an error saying "We are very sorry but SheetCAM TNG has encountered an internal error. It would be very helpful if you could send a debug report so we can try to find out what went wrong"

Hopefully someone can help steer me in the right direction to get this problem resolved.

I cant find an email on Sheetcams website to send them an email.

Thanks again
Keith Sawyer
WyoGreen
Posts: 257
Joined: Wed May 07, 2014 10:02 pm

Post by WyoGreen »

You could try to re-install Sheetcam. You can always download the latest copy from the website. Your license file should still be ok in the Sheetcam directory.

Steve
Post Reply