Having problems with or questions about SheetCam? Post them here.
-
jeff tunks
- Posts: 6
- Joined: Fri Mar 31, 2017 10:11 am
Post
by jeff tunks »
When I select an arc it cuts the arc fine but it leaves a burn hole when it begins the line I am cutting and then cuts the line fine?
-
WyoGreen
- Posts: 257
- Joined: Wed May 07, 2014 10:02 pm
Post
by WyoGreen »
If this is an open line, you can try reducing your Pierce delay to minimize the divot.
Steve