Rounded corners on square art

Having problems with or questions about SheetCam? Post them here.
Post Reply
jeff tunks
Posts: 6
Joined: Fri Mar 31, 2017 10:11 am

Rounded corners on square art

Post by jeff tunks »

When ever i cut at over 100 ipm Sheetcam cuts my square corners rounded? the faster i set my ipm the larger the radius? What could i be doing wrong?
User avatar
Les Newell
Site Admin
Posts: 3661
Joined: Thu May 11, 2006 8:12 pm

Post by Les Newell »

This is your machine controller, not SheetCam. You have CV enabled which rounds corners to keep the machine moving fast. Increasing acceleration will reduce the rounding. What controller are you using?
Post Reply