sheetcam.com Forum Index sheetcam.com
SheetCam discussion board
 
 Forum SubscriptionsForum Subscriptions    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Overcutting part of a pocket outline

 
Post new topic   Reply to topic    sheetcam.com Forum Index -> Yahoo posts (yahoo @forum.sheetcam.com)
View previous topic :: View next topic  
Author Message
Brian L



Joined: 26 May 2012
Posts: 161

PostPosted: Tue Apr 21, 2015 2:09 pm    Post subject: Overcutting part of a pocket outline Reply with quote

I think if you use the overcut feature you will end up with all four corners getting divots in them. I would just redraw the pocket in your DXF file to be extended out to the side to give the cut you want.
Brian Lamb
blamb11@cox.net (blamb11@cox.net)
www.lambtoolworks.com






On Apr 21, 2015, at 6:31 AM, 'benezan' lists@benezan-electronics.de (lists@benezan-electronics.de) [sheetcam] <sheetcam@yahoogroups.com (sheetcam@yahoogroups.com)> wrote:
Quote:

Hello,I'm still using the old version of sheetcam and have never updated to TNG since the parts I make have always been very simple, until now.This time I have to make several parts with an "open pocket", that means the outer contour of the part and the pocket overlap. (see picture)The green rectangle is the part outline. The red one is the pocket as in the original drawing. If I machine a pocket in the usual way it will look like the yellow. What I actually like to have is the blue contour. It should overcut the part outline by at least half the cutter diameter to make the pocket fully open instead of leaving two arced corners.In the old version there already was an "overcut corners" feature. I've read there is also a new overcut feature in the TNG version. Is it what I want or something different?Of course if it was only one part I could manually modify the drawing. But it gets annyoing if you have to do it often. Would be a reason for updrading...CheersBene-------------------- m2f --------------------Reply to this post simply by hitting reply in your email client or you can read this topic online here:http://www.forum.sheetcam.com/viewtopic.php?p=21626#21626-------------------- m2f --------------------Attachments: http://www.forum.sheetcam.com//files/sheetcam_overcutcontour_128.png






__._,_.___
Posted by: Brian Lamb <blamb11@cox.net>
[img]http://geo.yahoo.com/serv?s=97476590/grpId=12675264/grpspId=1705007389/msgId=16726/stime=1429625351[/img]

Visit Your Group
Unsubscribe ([email]sheetcam-unsubscribe@yahoogroups.com?subject=Unsubscribe[/email]) &bull; Terms of Use



__,_._,___
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    sheetcam.com Forum Index -> Yahoo posts (yahoo @forum.sheetcam.com) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group