Moving to new computer, tool set

cncbobuk · Post by **cncbobuk** » Tue Apr 14, 2015 2:50 pm

I have to move my Sheetcam installation to a new computer as the old one has died. Can I move the current tool box without having to re-enter all the details?
many thanks.

art · Post by **art** » Tue Apr 14, 2015 3:01 pm

Yes, just copy it over. I had to do the same thing recently when my
computer died. Also copied over my customized post processor files.

Just be sure to put them where they are accessible and YOU know where they are.

Art
Country Bubba

At 10:50 AM 4/14/2015, you wrote:

I have to move my Sheetcam installation to a new computer as the old one
has died. Can I move the current tool box without having to re-enter all
the details?
many thanks.

WyoGreen · Post by **WyoGreen** » Tue Apr 14, 2015 3:02 pm

Under the File heading there is a menu item Save Toolset as. Just save the toolset on a flashdrive or such and then open it from the same menu heading on the new computer.