sheetcam.com

[Astro]

Hey all,

Another question for the group. Is there support within sheetcam for a
worksheet reposition?

To clarify, an Amada machine with a X1270mm by Y1270mm working area, can
position the sheet underneath two worksheet holders (pneumatic rams), the
rams hold the sheet still, whilst clamps release sheet, move in Xpositive
direction, re-clamp sheet, allowing the machine to address the worksheet at
say for example.....X2000mm

Thanks all
Peter


------------------------------------

[Leslie Newell]

Hi Peter,

Currently SheetCam does not support indexing the sheet. The only way
you can really do that at the moment is to set up two jobs then manually
join the two files together with the appropriate commands to index the
sheet.

Les

Astro wrote:

[dewme5]

Bringing back a request from the dead. Indexing, or repositioning would be a huge bonus.

Same machine as well, Amada 655