Thanks.
Will that affect the other processes that I'm doing on the sheet as well? I just want to drill deeper, not cut deeper.
Search found 50 matches
- Wed Jan 28, 2015 11:03 pm
- Forum: Problems and questions
- Topic: Drill through
- Replies: 3
- Views: 1260
- Wed Jan 28, 2015 10:33 pm
- Forum: Problems and questions
- Topic: Drill through
- Replies: 3
- Views: 1260
Drill through
Good evening all
Is there some way to allow a drill to drill 0.770 in a 0.760 thickness material?
Thanks.
Is there some way to allow a drill to drill 0.770 in a 0.760 thickness material?
Thanks.
- Mon Jan 26, 2015 1:56 am
- Forum: Problems and questions
- Topic: Drill Bank
- Replies: 7
- Views: 2409
Drill Bank
I`m not sure if this is a problem or a question or a new request. Probably a bit of each. In any case, I have successfully (with help) modified a post to work with my C45 Thermwood. Now I need to get my Biesse Arrow working. All is OK except the drill bank. There are 13 different drills, each with t...
- Thu Jan 22, 2015 4:01 pm
- Forum: Problems and questions
- Topic: Tabbing issues
- Replies: 7
- Views: 3565
- Thu Jan 22, 2015 2:49 pm
- Forum: Problems and questions
- Topic: Tabbing issues
- Replies: 7
- Views: 3565
- Wed Jan 21, 2015 10:27 pm
- Forum: Problems and questions
- Topic: Tabbing issues
- Replies: 7
- Views: 3565
Tabbing issues
Hi All
When I auto assign tabs the program hangs.
Any ideas?
Can I place them manually?
6.0.15
Thanks.
When I auto assign tabs the program hangs.
Any ideas?
Can I place them manually?
6.0.15
Thanks.
- Tue Jan 20, 2015 9:23 pm
- Forum: Problems and questions
- Topic: Post Z issues
- Replies: 2
- Views: 1119
- Tue Jan 20, 2015 8:54 pm
- Forum: Problems and questions
- Topic: Post Z issues
- Replies: 2
- Views: 1119
Post Z issues
Hi All.
I have my post set with Z Zero set to the top of the work.
With a 0.760 depth of cut I would expect a Z-0.760 but I get a Z0.365 instead.
Any ideas?
I have my post set with Z Zero set to the top of the work.
With a 0.760 depth of cut I would expect a Z-0.760 but I get a Z0.365 instead.
Any ideas?
- Tue Jan 20, 2015 8:39 pm
- Forum: Problems and questions
- Topic: Post variables
- Replies: 5
- Views: 1976
- Tue Jan 20, 2015 7:13 pm
- Forum: Problems and questions
- Topic: Fagor post
- Replies: 2
- Views: 885
- Tue Jan 20, 2015 5:16 pm
- Forum: Problems and questions
- Topic: Post variables
- Replies: 5
- Views: 1976
Post variables
Hi All
Is there a way to use material dimensions as a variable in a post?
I need to do something like:
SET XSHIFT= 96. where 96 is the material length.
Also ZSHIFT= 0.625. where 0.625 is the material thickness.
Thanks.
Is there a way to use material dimensions as a variable in a post?
I need to do something like:
SET XSHIFT= 96. where 96 is the material length.
Also ZSHIFT= 0.625. where 0.625 is the material thickness.
Thanks.
- Tue Jan 20, 2015 5:12 pm
- Forum: Problems and questions
- Topic: Fagor post
- Replies: 2
- Views: 885
Fagor post
Hi All
I am using a modified Fagor post for my Thermwood. It seems to be OK except for the dialog bx that comes up and asks for a program number.
How do I get rid of that. I tried a few things, but no success.
Thanks.
I am using a modified Fagor post for my Thermwood. It seems to be OK except for the dialog bx that comes up and asks for a program number.
How do I get rid of that. I tried a few things, but no success.
Thanks.
- Sun Jan 18, 2015 8:54 pm
- Forum: Problems and questions
- Topic: Post question
- Replies: 5
- Views: 1614
- Fri Jan 16, 2015 10:17 pm
- Forum: Problems and questions
- Topic: Post question
- Replies: 5
- Views: 1614
Post question
Good evening
How would I set up a post to call the next tool right after a tool change?
Something like:
T3 (initial tool needed)
M7 (tool change)
T100 (next tool)
G0X20 (start to use T3)
How would I set up a post to call the next tool right after a tool change?
Something like:
T3 (initial tool needed)
M7 (tool change)
T100 (next tool)
G0X20 (start to use T3)
- Wed Jan 14, 2015 3:17 am
- Forum: Problems and questions
- Topic: Rough and Finish pass
- Replies: 6
- Views: 2502