sheetcam.com

Thank you very much! Up and running again now.

Hello.

I am a hobby user of Sheetcam and I use it once in a while. I installed it on my laptop which I was going to use for my CNC setup. However this laptop has now crashed and I 'm unable to recover it. And I was wondering if it's ok to use the license I bought on my main pc?


Thanks,

Mr. Emo

Thank you, I forgot to mention that I am using a floating head aswell but I managed to edit this in myself. I will let you know how it goes!

Linux THC . My control system is from Planet CNC.

I think this is the one. I am not using the engraver part. But this is the one I got recommended earlier.

Is this normal for all plasma cutters?

Hello. I am using the Planet CNC software and hardware and a Pakmaster 50. When the Pakmaster is about to cut the machine starts with air before it starts to cut. So I have timed the Pierce time to be about 1.2 seconds. But this is only on the first cut! If the next cut is just a few cm away and the...

Thank you! That seemed to work ok.

Apparently Planet CNC software doesn't recognize the code G31. So that definitly doesn't work.

Any suggestions to other post processors that would work with this software or do I have to rewrite the processor?

I've been testing a little bit now and it seems to work ok. But I have some concerns about the floating head. It doesn't seem to work? I set my offset to 2.5mm There is a post: --If this value is set to true then use G28 (home) for the Z reference --Set it to false for G31 probe refHome = true Is th...

Hello. I am very new to sheetcam and I am trying to setup my program. I am trying to chose a post processor. My CNC setup is currently from Planet CNC and I am using a MK3 board. I have been looking at the Mach 3 plasma TCH with scriber and backlash compensation. But it seems that this is featuring ...