sheetcam.com

After importing drawing, setting up operation and running simulation everything runs fine, save job, save part, run post processor and save g/code.close job and save, open same job and get error message (NO HOLES WERE FOUND), this as happened pretty regular over the last 3 years. Problem is it means...

It is possible some one as stole your License, check with Les. are try it with another dxf that previously worked.

I use inkscape, it is probably inkscape are photoshop that as created the lines, you need to remove the lines you do not want in inkscape.

Sheetcam_Option_Application options_Drawing import_Remove duplicate lines

From Inkscape use SVG file instead of DXF this will work, I use Inkscape and have trouble when using Dxf from this program to Sheetcam.

I have used Sheetcam for over 12 months with no problems, from this afternoon when I loaded various parts and run Simulation, all I get is (Warning: feed rate is zero) I have tried re-loading Sheetcam, checked my options etc., nothing seems to work.
Regards.

Hello,
Just ask Les, he will let you know he is the Top Man.
Regards.

When optimising the part cut order, this sets the preferred cut order, for instance, if it is set fully towards "H", the optimisation will prefer to move to the part to the left and right, rather than up and down.

Go back into Corel and remove the extra nodes, straighten the lines and turn the point back into a curve, it is all done with the node tool. try Youtube it will show you how on there.

His the test drawing only supposed to be 11.622 x 8.098 mm Regards Opened your Test file from Inkscape both in SVG and DXF, they opened perfectly and cut perfectly first time no faults what soever, when saving from Inkscape I ticked the box to save as polylines not splines, I think this was your pr...

His the test drawing only supposed to be 11.622 x 8.098 mm
Regards

In Corel click on Layers, if there are any layers you do not want to use click on the eye, and it will close the layer, if you want to put them all on 1 layer, transfer one to the other, if you want to export them into Sheetcam, do that and and seperate them in Sheetcam into seperate cutting layers,...

Save your file as desktop cutting plotter (autocad) dxf r14.

I am very new to the world of plasma cutting and its associated software. Learning more and more everyday, but still so much learn. Currently I need some help with importing files into sheetcam from coreldraw X8. I'm new to corel as well. I'm creating my files, (usually purchased files online or im...

I am very new to the world of plasma cutting and its associated software. Learning more and more everyday, but still so much learn. Currently I need some help with importing files into sheetcam from coreldraw X8. I'm new to corel as well. I'm creating my files, (usually purchased files online or im...