sheetcam.com

Ok, thanks.

Have you tried "Generic plasma with optional scriber"?

I dont use TinyG or Chilipeppr, but we should be able to make it work for you. Let me know.

Is there any chance we can also access part dimensions in this manner as well? Such as: partMinX, partMaxX, partMinY, partMaxY

Vmax549, I copied and pasted your code and this was the output after I removed the comment to get it to compile: N0200 X3.3970 Y0.4879 N0210 Z0.0800 N0220G00 Z0.250 G28.1 Z0.12 F19.685 N0230 G92 Z0.0 N0240 G00 Z0.0591 N0250 G92 Z0.0 N0260 G00 Z0.0800 after adding the end of lines and spaces the func...

This is a loaded question you pose. Which is probably why nobody has replied. Did you get this working yet? If not, you will need to tell me more about your setup before I can offer any advice. I don't use Mach3 or Proma, but programming a THC on and off command in the post aren't too hard to do. Le...

After much frustration it occurred to me that perhaps I should not be using the development version. I have installed the non-development and it no longer crashes in Windows, though it still doesn't work in Linux.

I'm not sure about the feed hold, but to switch between multiple posts, just go to Options->Machine->Post Processor (tab)->Post processor (drop down menu). If you want to create a new post, I recommend copying an existing one. To do this open a Windows Explorer window and locate the SheetCam TNG fil...

Hi Richard, I don't use that post processor, but I looked at it and learned that this is not an easy thing to do. I edited the "OnPedDown" and "Reference" functions to output text in the gCode to show when they are called in relation to the coordinate that you want to change, and...

Hi, I've been using SheetCam for a while with great success, but it appears my luck has run out. I purchased the RotaryPlasma plugin and I copied and pasted the License key into the box as instructed to. After closing SheetCam and reopening it crashes. After I send the Support File, SheetCam boots w...